Product ID:ANODEX 61-X, 10206
MSDS Date:12/16/1988
FSC:6850
NIIN:00N062400
MSDS Number: BYGRV

MACDERMID INC

526 HUNTINGDON AVE
WATERBURY, CT 06708
US

Emergency Phone: 203-575-5700

Info Phone: 313-644-5626

Cage: 1FK56

MACDERMID INC

WATERBURY, CT 06702 US

Telephone: 203-575-5700

Cage: 1FK56

SODIUM HYDROXIDE (CERCLA)

CAS: 1310-73-2

RTECS: WB4900000

Fraction By Weight: 55%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3, C

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:WILL CAUSE SEVERE BURNS TO SKIN &
MUCOUS MEMBRANES. DIRECT EYE CONTACT WILL CAUSE SEVERE BURNS
POSSIBLY RESULTING IN BLINDNESS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES:FLUSH W/WATER FOR AT LEAST 15 MINUTES. CONTACT MD
IMMEDIATELY! SKIN:FLUSH W/WATER. WASH W/VINEGAR. CONTACT MD IF
IRRITATION PERSISTS. INGEST:DO NOT INDUCE VOMITING. GIVE LARGE
AMOUNTS OF WATER. C ONTACT MD IMMEDIATELY! INHAL:REMOVE TO FRESH
AIR. CONTACT MD SHOULD IRRITATION OCCUR.

Flash Point:NON FLAMMABLE
Extinguishing Media:AS FOR SURROUNDING MATERIALS.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:EXOTHERMIC REACTION WHEN BROUGHT IN
CONTACT W/WATER.

Spill Release Procedures:SWEEP UP EXCESS. FLUSH AREA W/WATER TO
CHEMICAL DRAIN. WEAR PROTECTIVE CLOTHING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN DRY AREA, IN TIGHTLY CLOSED
CONTAINERS.
Other Precautions:CORROSIVE MATERIAL.

Respiratory Protection:NIOSH/MSHA APPROVED DUST MASK SHOULD DUSTING
OCCUR.
Ventilation:MECHANICAL (GENERAL).
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . RUBBER APRON, RUBBER BOOTS.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
EYE PROT:& FULL LENGTH FACESHIELD .

Solubility in Water:APPRECIABLE
Appearance and Odor:WHITE POWDER.

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/ACID OR ACIDIC MATERIALS.
Hazardous Decomposition Products:OXIDES OF CARBON.

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS . DISPOSE OF IN A SECURED APPROVED LANDFILL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.